Menu

径向铆机

Orbitform’s standard modular bench and pedestal machines offer a complete assembly solution for radial riveting and forming for work pieces smaller than 0.125 inch diameter to over 0.5 inch (12.5 mm) for a consistent quality form.

径向铆机
Loading...
  • 型号
  • R-125
  • R-240
  • R-310
  • R-500
  • R-750

Orbitform’s R-125 radial bench machine is designed for small work piece radial riveting. The bench machine, comprised of a radial forming modular powerhead, radial head with developed peen, adjustable column, base with t-slots for easy fixture mounting, and complete controls, is commonly used to assemble electrical components, medical devices, computer hardware, small hand tools and other small scale riveted assemblies. Orbitform’s application engineers outline the required radial head and radial peen to conduct the riveting application and, if the customer desires, Orbitform can design and build custom machine actuation, a safety system, a fixturing method, an error proofing process, and/or other expert assembly features associated with radial riveting machines and automatic assembly equipment.

Weight 150lbs
Throat Depth 3.63”
Head Forming Capacity .125" (3.25mm)
Max Downward Force 590 lbs @ 100 psi
Max Stroke 1.5" (38mm)
  • Download .dwg
  • Download .eprt
  • Download .step

Orbitform’s modular R-125 radial riveting bench machine is manufactured and assembled at Orbitform’s factory in Jackson, Michigan, USA. The radial riveting bench machine is available with many standard features and the radial forming bench machine can be customized with options to help monitor, control, and improve the assembly process. Orbitform’s application engineers listen and seek the appropriate answer for each specific assembly process being considered. Orbitform can design and build a complete turnkey assembly system including controls, safety, fixtures, errorproofing, and more.

Standard Features and Specifications for Radial Riveting or Radial Forming Applications:

Touch Screen monitor on Orbitform Equipment

  • Powerhead with electric motor and radial head with peen developed and tested for each application
  • Column and base assembly with 5" (127 mm) vertical powerhead height adjustment and t-slot base.  These features allow for flexibility in machine setup and fixturing.  A standard bench machine can easily be configured to an assortment of different assembly applications.
  • HMI touch panel for enhanced diagnostics
  • Directional valve with dual pilot operated (PO) check to prevent powerhead drifting
  • Dual low actuation force palm buttons for cycling the machine
  • Pneumatic solenoid valves to assist with smooth and exact fluid motion
  • Filter-regulator unit with gauge to keep the air supply clean and protect the machine’s components
  • Digital adjustable dwell timer
  • Resettable cycle counter to keep track of machine cycles
  • Electrical enclosure with disconnect switch
  • Illuminated power on selector switch
  • Programmable Logic Controller

Bench Machine Options:

Electrical Options

  • Light curtains for operator safety
  • PLC expansion for an additional I/O
  • Low-profile LED worklight to enhance the lighting of the work area
  • Home limit switch to acknowledge when the tool is fully retracted

Mechanical Options

  • Precision machine base 24"W x 24"L x 30"H (610 mm W x 610 mm L x 760 mm H)
  • Precision machine base with casters
  • Guarding for operator safety
  • Air line lubricator
  • Custom part fixturing designed and built by Orbitform allowing a turnkey riveting solution
  • Pneumatic fixture slide to allow for simpler part loading
  • Offset motor mount to allow for a shorter machine height and/or to allow for a through spindle pressure pad
  • Gear reducer to reduce the RPM to allow for the optimal forming speed
  • Spindle brake to control the tool position or to stop the tool rotation for certain applications
  • Radial alignment kit to help you set up the machine if the machine configurations change

Error Proofing, Process Monitoring, Process Control Options

  • Process Intelligence Package: Load Cell, LVDT (Linear Variable Displacement Transducer), Touch Screen
  • Pressure pad (standard, height sensing, or programmable height sensing) to secure the work piece prior to forming or assembly, to assist with assembly process monitoring / process control, or to confirm part presence prior to continuing the assembly process

Orbitform’s R-240 radial bench machine is designed for small work piece radial riveting. The bench machine, comprised of a radial forming modular powerhead, radial head with developed peen, adjustable column, base with t-slots for easy fixture mounting, and complete controls, is commonly used to assemble electrical components, medical devices, computer hardware, small hand tools and other small scale riveted assemblies. Orbitform’s application engineers outline the required radial head and radial peen to conduct the riveting application and, if the customer desires, Orbitform can design and build custom machine actuation, a safety system, a fixturing method, an error proofing process, and/or other expert assembly features associated with radial riveting machines and automatic assembly equipment.

Weight 250 Lbs.
Throat Depth 4.50”
Head Forming Capacity .236" (6mm)
Max Downward Force 1460 lbs @ 100 psi
Max Stroke 1.75" (44.5mm)
  • Download .dwg
  • Download .eprt
  • Download .step

Orbitform’s modular R-240 radial riveting bench machine is manufactured and assembled at Orbitform’s factory in Jackson, Michigan, USA. The radial riveting bench machine is available with many standard features and the radial forming bench machine can be customized with options to help monitor, control, and improve the assembly process. Orbitform’s application engineers listen and seek the appropriate answer for each specific assembly process being considered. Orbitform can design and build a complete turnkey assembly system including controls, safety, fixtures, errorproofing, and more.

Standard Features and Specifications for Radial Riveting or Radial Forming Applications:

Touch Screen monitor on Orbitform Equipment

  • Powerhead with electric motor and radial head with peen developed and tested for each application
  • Column and base assembly with 5" (127 mm) vertical powerhead height adjustment and t-slot base.  These features allow for flexibility in machine setup and fixturing.  A standard bench machine can easily be configured to an assortment of different assembly applications.
  • HMI touch panel for enhanced diagnostics
  • Directional valve with dual pilot operated (PO) check to prevent powerhead drifting
  • Dual low actuation force palm buttons for cycling the machine
  • Pneumatic solenoid valves to assist with smooth and exact fluid motion
  • Filter-regulator unit with gauge to keep the air supply clean and protect the machine’s components
  • Digital adjustable dwell timer
  • Resettable cycle counter to keep track of machine cycles
  • Electrical enclosure with disconnect switch
  • Illuminated power on selector switch
  • Programmable Logic Controller

Bench Machine Options:

Electrical Options

  • Light curtains for operator safety
  • PLC expansion for an additional I/O
  • Low-profile LED worklight to enhance the lighting of the work area
  • Home limit switch to acknowledge when the tool is fully retracted

Mechanical Options

  • Precision machine base 24"W x 24"L x 30"H (610 mm W x 610 mm L x 760 mm H)
  • Precision machine base with casters
  • Guarding for operator safety
  • Air line lubricator
  • Custom part fixturing designed and built by Orbitform allowing a turnkey riveting solution
  • Pneumatic fixture slide to allow for simpler part loading
  • Offset motor mount to allow for a shorter machine height and/or to allow for a through spindle pressure pad
  • Gear reducer to reduce the RPM to allow for the optimal forming speed
  • Spindle brake to control the tool position or to stop the tool rotation for certain applications
  • Radial alignment kit to help you set up the machine if the machine configurations change

Error Proofing, Process Monitoring, Process Control Options

  • Process Intelligence Package: Load Cell, LVDT (Linear Variable Displacement Transducer), Touch Screen
  • Pressure pad (standard, height sensing, or programmable height sensing) to secure the work piece prior to forming or assembly, to assist with assembly process monitoring / process control, or to confirm part presence prior to continuing the assembly process

Orbitform’s R-310 radial bench machine is designed for small to medium size work piece radial riveting. The bench machine, comprised of a radial forming modular powerhead, radial head with developed peen, adjustable column, base with t-slots for easy fixture mounting, and complete controls, is commonly used with assembly machines for HVAC products, hinged assemblies, brake pads, turbine and hub assemblies, clamps, and other medium scale riveted assemblies. Orbitform’s application engineers outline the required radial head and radial peen to conduct the riveting application and, if the customer desires, Orbitform can design and build custom machine actuation, a safety system, a fixturing method, an error proofing process, and/or other expert assembly features associated with radial riveting machines and automatic assembly equipment.

Weight 580 Lbs.
Throat Depth 6.25”
Head Forming Capacity .312" (7.92mm)
Max Downward Force 2120 lbs @ 100 psi
Max Stroke 2.0" (50.75mm)
  • Download .dwg
  • Download .eprt
  • Download .step

Orbitform’s modular R-310 radial riveting bench machine is manufactured and assembled at Orbitform’s factory in Jackson, Michigan, USA. The radial riveting bench machine is available with many standard features and the radial forming bench machine can be customized with options to help monitor, control, and improve the assembly process. Orbitform’s application engineers listen and seek the appropriate answer for each specific assembly process being considered. Orbitform can design and build a complete turnkey assembly system including controls, safety, fixtures, errorproofing, and more.

Standard Features and Specifications for Radial Riveting or Radial Forming Applications:

Touch Screen monitor on Orbitform Equipment

  • Powerhead with electric motor and radial head with peen developed and tested for each application
  • Column and base assembly with 5" (127 mm) vertical powerhead height adjustment and t-slot base.  These features allow for flexibility in machine setup and fixturing.  A standard bench machine can easily be configured to an assortment of different assembly applications.
  • HMI touch panel for enhanced diagnostics
  • Directional valve with dual pilot operated (PO) check to prevent powerhead drifting
  • Dual low actuation force palm buttons for cycling the machine
  • Pneumatic solenoid valves to assist with smooth and exact fluid motion
  • Filter-regulator unit with gauge to keep the air supply clean and protect the machine’s components
  • Digital adjustable dwell timer
  • Resettable cycle counter to keep track of machine cycles
  • Electrical enclosure with disconnect switch
  • Illuminated power on selector switch
  • Programmable Logic Controller

Bench Machine Options:

Electrical Options

  • Light curtains for operator safety
  • PLC expansion for an additional I/O
  • Low-profile LED worklight to enhance the lighting of the work area
  • Home limit switch to acknowledge when the tool is fully retracted

Mechanical Options

  • Precision machine base 24"W x 24"L x 30"H (610 mm W x 610 mm L x 760 mm H)
  • Precision machine base with casters
  • Guarding for operator safety
  • Air line lubricator
  • Custom part fixturing designed and built by Orbitform allowing a turnkey riveting solution
  • Pneumatic fixture slide to allow for simpler part loading
  • Offset motor mount to allow for a shorter machine height and/or to allow for a through spindle pressure pad
  • Gear reducer to reduce the RPM to allow for the optimal forming speed
  • Spindle brake to control the tool position or to stop the tool rotation for certain applications
  • Radial alignment kit to help you set up the machine if the machine configurations change

Error Proofing, Process Monitoring, Process Control Options

  • Process Intelligence Package: Load Cell, LVDT (Linear Variable Displacement Transducer), Touch Screen
  • Pressure pad (standard, height sensing, or programmable height sensing) to secure the work piece prior to forming or assembly, to assist with assembly process monitoring / process control, or to confirm part presence prior to continuing the assembly process

Orbitform’s R-500 radial bench machine is designed for small to medium size work piece radial riveting. The bench machine, comprised of a radial forming modular powerhead, radial head with developed peen, adjustable column, base with t-slots for easy fixture mounting, and complete controls, is commonly used with assembly machines for HVAC products, hinged assemblies, brake pads, turbine and hub assemblies, clamps, and other medium scale riveted assemblies. Orbitform’s application engineers outline the required radial head and radial peen to conduct the riveting application and, if the customer desires, Orbitform can design and build custom machine actuation, a safety system, a fixturing method, an error proofing process, and/or other expert assembly features associated with radial riveting machines and automatic assembly equipment.

Weight 1000 Lbs.
Throat Depth 9.00”
Head Forming Capacity .500" (12.75mm)
Max Downward Force 4,400 lbs @ 100 psi
Max Stroke 2.5" (63.5mm)
  • Download .dwg
  • Download .easm
  • Download .step

Orbitform’s modular R-500 radial riveting bench machine is manufactured and assembled at Orbitform’s factory in Jackson, Michigan, USA. The radial riveting bench machine is available with many standard features and the radial forming bench machine can be customized with options to help monitor, control, and improve the assembly process. Orbitform’s application engineers listen and seek the appropriate answer for each specific assembly process being considered. Orbitform can design and build a complete turnkey assembly system including controls, safety, fixtures, errorproofing, and more.

Standard Features and Specifications for Radial Riveting or Radial Forming Applications:

Touch Screen monitor on Orbitform Equipment

  • Powerhead with electric motor and radial head with peen developed and tested for each application
  • Column and base assembly with 5" (127 mm) vertical powerhead height adjustment and t-slot base.  These features allow for flexibility in machine setup and fixturing.  A standard bench machine can easily be configured to an assortment of different assembly applications.
  • HMI touch panel for enhanced diagnostics
  • Directional valve with dual pilot operated (PO) check to prevent powerhead drifting
  • Dual low actuation force palm buttons for cycling the machine
  • Pneumatic solenoid valves to assist with smooth and exact fluid motion
  • Filter-regulator unit with gauge to keep the air supply clean and protect the machine’s components
  • Digital adjustable dwell timer
  • Resettable cycle counter to keep track of machine cycles
  • Electrical enclosure with disconnect switch
  • Illuminated power on selector switch
  • Programmable Logic Controller

Bench Machine Options:

Electrical Options

  • Light curtains for operator safety
  • PLC expansion for an additional I/O
  • Low-profile LED worklight to enhance the lighting of the work area
  • Home limit switch to acknowledge when the tool is fully retracted

Mechanical Options

  • Precision machine base 24"W x 24"L x 30"H (610 mm W x 610 mm L x 760 mm H)
  • Precision machine base with casters
  • Guarding for operator safety
  • Air line lubricator
  • Custom part fixturing designed and built by Orbitform allowing a turnkey riveting solution
  • Pneumatic fixture slide to allow for simpler part loading
  • Offset motor mount to allow for a shorter machine height and/or to allow for a through spindle pressure pad
  • Gear reducer to reduce the RPM to allow for the optimal forming speed
  • Spindle brake to control the tool position or to stop the tool rotation for certain applications
  • Radial alignment kit to help you set up the machine if the machine configurations change

Error Proofing, Process Monitoring, Process Control Options

  • Process Intelligence Package: Load Cell, LVDT (Linear Variable Displacement Transducer), Touch Screen
  • Pressure pad (standard, height sensing, or programmable height sensing) to secure the work piece prior to forming or assembly, to assist with assembly process monitoring / process control, or to confirm part presence prior to continuing the assembly process

Orbitform’s R-750 radial bench machine is designed for medium to large size work piece radial riveting. The bench machine, comprised of a radial forming modular powerhead, radial head with developed peen, adjustable column, base with t-slots for easy fixture mounting, and complete controls, is commonly used with assembly machines for HVAC products, hinged assemblies, brake pads, turbine and hub assemblies, clamps, and other medium scale riveted assemblies. Orbitform’s application engineers outline the required radial head and radial peen to conduct the riveting application and, if the customer desires, Orbitform can design and build custom machine actuation, a safety system, a fixturing method, an error proofing process, and/or other expert assembly features associated with radial riveting machines and automatic assembly equipment.

Weight 1100 Lbs.
Throat Depth 8.88”
Head Forming Capacity .750" (19mm)
Max Downward Force 7,510 lbs @ 100 psi
Max Stroke 2.5" (63.5mm)
  • Download .dwg
  • Download .easm
  • Download .step

Orbitform’s modular R-750 radial riveting bench machine is manufactured and assembled at Orbitform’s factory in Jackson, Michigan, USA. The radial riveting bench machine is available with many standard features and the radial forming bench machine can be customized with options to help monitor, control, and improve the assembly process. Orbitform’s application engineers listen and seek the appropriate answer for each specific assembly process being considered. Orbitform can design and build a complete turnkey assembly system including controls, safety, fixtures, errorproofing, and more.

Standard Features and Specifications for Radial Riveting or Radial Forming Applications:

Touch Screen monitor on Orbitform Equipment

  • Powerhead with electric motor and radial head with peen developed and tested for each application
  • Column and base assembly with 5" (127 mm) vertical powerhead height adjustment and t-slot base. These features allow for flexibility in machine setup and fixturing. A standard bench machine can easily be configured to an assortment of different assembly applications.
  • HMI touch panel for enhanced diagnostics
  • Directional valve with dual pilot operated (PO) check to prevent powerhead drifting
  • Dual low actuation force palm buttons for cycling the machine
  • Pneumatic solenoid valves to assist with smooth and exact fluid motion
  • Filter-regulator unit with gauge to keep the air supply clean and protect the machine’s components
  • Digital adjustable dwell timer
  • Resettable cycle counter to keep track of machine cycles
  • Electrical enclosure with disconnect switch
  • Illuminated power on selector switch
  • Programmable Logic Controller

Bench Machine Options:

Electrical Options

  • Light curtains for operator safety
  • PLC expansion for an additional I/O
  • Low-profile LED worklight to enhance the lighting of the work area
  • Home limit switch to acknowledge when the tool is fully retracted

Mechanical Options

  • Precision machine base 24"W x 24"L x 30"H (610 mm W x 610 mm L x 760 mm H)
  • Precision machine base with casters
  • Guarding for operator safety
  • Air line lubricator
  • Custom part fixturing designed and built by Orbitform allowing a turnkey riveting solution
  • Pneumatic fixture slide to allow for simpler part loading
  • Offset motor mount to allow for a shorter machine height and/or to allow for a through spindle pressure pad
  • Gear reducer to reduce the RPM to allow for the optimal forming speed
  • Spindle brake to control the tool position or to stop the tool rotation for certain applications
  • Radial alignment kit to help you set up the machine if the machine configurations change

Error Proofing, Process Monitoring, Process Control Options

  • Process Intelligence Package: Load Cell, LVDT (Linear Variable Displacement Transducer), Touch Screen
  • Pressure pad (standard, height sensing, or programmable height sensing) to secure the work piece prior to forming or assembly, to assist with assembly process monitoring / process control, or to confirm part presence prior to continuing the assembly process